-
Enhanced oxidation resistance in refractory niobium by surface Ti+_Si+ implantation
- Log in to view price and purchase
-

Enhancement in Strength of a Cu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr Alloy by Cryo-Rolling and Aging
- Log in to view price and purchase
-
Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys
- Log in to view price and purchase
-

Enhancement of perpendicular magnetic properties of hcp–Co80Pt20 thin films by oxide seed layer
- Log in to view price and purchase
-

Enhancement of Thermoelectric Properties of Silicon by Nanoscale Structure Control
- Log in to view price and purchase
-
Enhancing hot ductility of a cryogenic high manganese steel at a high strain rate by matrix homogenization
- Log in to view price and purchase
-
Enhancing yield strength and ductility of Fe-Mn-C-xAl (x = 0, 3) high manganese steel by cryogenic rolling
- Log in to view price and purchase
-
Equation of state, phase stability, and phase transformations of uranium-6 wt. % niobium under high pressure and temperature
- Log in to view price and purchase
-

ERNiFeCr-2 용가재 적용에 따른 CM247LC 초내열합금 용접부 응고균열 민감도 변화 거동
- Log in to view price and purchase
-
ERP의 새로운 시대
- Log in to view price and purchase
-

Estimation of dimensional changes during heat treatment of Al–10Si–Mg alloy castings
- Log in to view price and purchase
-

Estimation of Exchange Current Density for the Hydrogen Evolution Reaction of Titanium in Sulfuric Acid Solution
- Log in to view price and purchase
-

Estimation of flow behavior by texture analysis of stir zone in friction stir welding of 6% Ni carbon steel
- Log in to view price and purchase
-
Estonian military robot maker weighs production in Ukraine
- Log in to view price and purchase
-
EUROPEAN PATENT APPLICATION METHOD OF JOINING TANTALUM CLAD STEEL STRUCTURES
- Log in to view price and purchase
-
EUROPEAN PATENT OFFICE
- Log in to view price and purchase
-
EUROPEAN PATENT SPECIFICATION METHOD OF JOINING METAL CLAD STEEL STRUCTURES
- Log in to view price and purchase
-
EUROPEAN PATENT SPECIFICATION METHOD OF JOINING TANTALUM CLAD STEEL STRUCTURES
- Log in to view price and purchase
-

Evaluation of Adhesion of Oxide Scale by Tensile Test
- Log in to view price and purchase
-

Evaluation of Antibacterial Activity of Copper by Hydrogen Sulfide-Producing Salmonella
- Log in to view price and purchase
-

Evaluation of Applicability on Multi-Axis Residual Stress Formed by Hard Sphere Indentation for Stress Corrosion Cracking Test
- Log in to view price and purchase
-
Evaluation of bonding properties by flat indentation method for an EBW joint of RAFM steel for fusion application
- Log in to view price and purchase
-

Evaluation of corrosion on the fuel performance of stainless steel cladding
- Log in to view price and purchase
-

Evaluation of Deterioration Damage for Liquid Oxygen_Hydrogen Combustion Chamber of Copper Alloy by Replica Method for Oxide Film
- Log in to view price and purchase
-

Evaluation of Elastic Deformation Behavior of ARB Processed ultrafine Grained Ni Polycrystalline Material by X-ray Diffraction
- Log in to view price and purchase
-

Evaluation of Fracture Behavior of Oxide Scale Formed on Carbon Steel Using Indentation Test and Acoustic Emission Method
- Log in to view price and purchase
-

Evaluation of Frictional Properties of Tungsten Disulfide Bonded Films at High Temperature in Vacuum Environments
- Log in to view price and purchase
-

Evaluation of Grain Shape of Metals Using SEM with Segmented BSE Detector
- Log in to view price and purchase
-
Evaluation of Heat-affected Zone Hydrogen-induced Cracking in High-strength Steels
- Log in to view price and purchase
-

Evaluation of Hydrogen Embrittlement for High Strength Steel by Three-Point Bending Test and Application to Zinc Electroplating
- Log in to view price and purchase
-

Evaluation of macrozone dimensions by ultrasound and EBSD techniques
- Log in to view price and purchase
-
Evaluation of Oxidative Degradation of Ultra–High–Molecular–Weight Polyethylene Irradiated by Gamma–Ray
- Log in to view price and purchase
-

Evaluation of Oxidative Degradation of Ultra–High–Molecular–Weight Polyethylene Irradiated by Gamma–Ray
- Log in to view price and purchase
-

Evaluation of PM 718 HIPed with d-Subsolvus Temperature
- Log in to view price and purchase
-

Evaluation of PM 718 HIPed with d-Subsolvus Temperature
- Log in to view price and purchase
-
Evaluation of stainless steel-zirconium alloys as high-level nuclear waste forms
- Log in to view price and purchase
-

Evaluation of surface damage on palladium using cross-sectional electron backscatter diffraction analysis 1
- Log in to view price and purchase
-

Evaluation of the Evolved Heat Behavior for the Exothermic Sleeve by Thermal and XRD Analyses
- Log in to view price and purchase
-

Evaluations of Mechanical Properties of Electrodeposited Nickel Film by Using Micro-Testing Method
- Log in to view price and purchase
-

Evolution of Harmonic Structure in Two Phase Stainless Steel by Mechanical Milling Process
- Log in to view price and purchase
-
Evolution of microstructure in niobium rich (α2 + γ) based titanium aluminide alloy during hot compression
- Log in to view price and purchase
-

Evolution of Quasi-Brittle Hydrogen-Assisted Damages in a Dual-Phase Steel
- Log in to view price and purchase
-
Evolution of β-Nb precipitates during hydrogenation of a zirconium-niobium alloy
- Log in to view price and purchase
-
EV배터리에 ‘충진재’를 채워 열화 억제 및 방화(防火)
- Log in to view price and purchase
-
Experience of Application of EBW in Producing Welded VT41 Alloy Drums in the Design of an HPC in an Advanced Engine
- Log in to view price and purchase
-
Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing γ-TiAl based alloy
- Log in to view price and purchase
-

Experimental Determination of Isothermal Section at 1500°C in the Ternary Re-Cr-Nb System
- Log in to view price and purchase
-
Experimental studies of the cutting force and surface morphology of explosively clad Ti–steel plates
- Log in to view price and purchase
-

Experimental Study of Embrittlement of Zr-1%Nb VVER Cladding under LOCA-Relevant Conditions
- Log in to view price and purchase
-

Exploratory Study of Substitutional Elements in Mg₂Si for Inducing State of Negative Chemical Pressure
- Log in to view price and purchase
-
Explosive cladding and post-weld heat treatment of mild steel and titanium
- Log in to view price and purchase
-
Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers
- Log in to view price and purchase
-

Extra Strengthening and Superplasticity of Ultrafine-Grained A2024 Alloy Produced by High-Pressure Sliding
- Log in to view price and purchase
-

Extra Strengthening and Superplasticity of Ultrafine-Grained A2024 Alloy Produced by High-Pressure Sliding
- Log in to view price and purchase
-
Extraordinary Deformation Modes in Ni-Base Superalloy CM247LC at Room Temperature
- Log in to view price and purchase
-
Fabrication and Evaluation of Superconducting Single-Cell Cavities Manufactured Using Various Materials and Methods
- Log in to view price and purchase
-

Fabrication and Evaluation of Visible Light Active TiO₂ Photocatalyst by Molten Salt Method
- Log in to view price and purchase
-

Fabrication and Tensile Property of Sandwich Panel with ADC12 Foam Core by Friction Stir Processing Route
- Log in to view price and purchase
-
Fabrication and wear property of NiCo coated ZrO2–Al2O3 ceramic particles reinforced high manganese steel-based composites
- Log in to view price and purchase
-

Fabrication of (001)-Oriented MgO Thin Films on Si Substrates
- Log in to view price and purchase
-

Fabrication of Al-Coated CNF Reinforced Aluminum Matrix Composite by Pressureless Infiltration
- Log in to view price and purchase
-

Fabrication of Aluminum Foam by Casting Precursor Method
- Log in to view price and purchase
-

Fabrication of Aluminum Pipe from Aluminum Chips by Friction Stir Back Extrusion
- Log in to view price and purchase
-
Fabrication of Ca and P containing niobium oxide ceramic coatings on niobium by PEO coupled EPD process
- Log in to view price and purchase
-
Fabrication of CaAl12O19–CaTiO3 composites and their potential usage for TiAl alloy smelting
- Log in to view price and purchase
-

Fabrication of Carbon Fiber Oriented Al-Based Composites by Hot Extrusion and Evaluation of Their Thermal Conductivity
- Log in to view price and purchase
-
Fabrication of flexible electronics improved using gold and water-vapor plasma
- Log in to view price and purchase
-

Fabrication of Laminated Spark Plasma Sintered Compacts Composed of Alumina-Particle-Dispersed Magnesium and Magnesium
- Log in to view price and purchase
-
Fabrication of low thermal expansion Fe–Ni alloys by in-situ alloying using twin-wire arc additive manufacturing
- Log in to view price and purchase
-

Fabrication of Manganese Nitride Mn₃CuN Thin Films by Ultrahigh-Field Sputtering and Their Characterization
- Log in to view price and purchase
-

Fabrication of Manganese Nitride Mn3CuN Thin Films by Ultrahigh-Field Sputtering and Their Characterization
- Log in to view price and purchase
-
Fabrication of niobium carbide coating on niobium by interstitial carburization
- Log in to view price and purchase
-

Fabrication of Ordered Nano Cell Structure on Ge Surface by Focused Ion Beam
- Log in to view price and purchase
-

Fabrication of Ordered Nano-Cell Structure on Ge Surface by Focused Ion Beam
- Log in to view price and purchase
-

Fabrication of Porous Aluminum Filled Aluminum Pipe from Aluminum Recycle Chips by Friction Stir Back Extrusion
- Log in to view price and purchase
-

Fabrication of Ti₁-xCrxOz and Analysis of Its Microstructure and Thermoelectric Properties
- Log in to view price and purchase
-

Fabrication of TiC films using microwave-excited high-density plasma near a substrate
- Log in to view price and purchase
-

Fabrication of TiO₂_SiO₂ Composite Coating via a High-Temperature Self-Organizing Porous TiO₂ Layer on Ti
- Log in to view price and purchase
-

Fabrication of Two Layers Porous Aluminum Varying Porosity by Friction Powder Sintering Process and Its Compression Properties
- Log in to view price and purchase
-

Fabrication of YBa₂Cu₃O₇ Superconducting Film on {100}〈001〉Textured Cu Tape via Conductive Buffer Layers
- Log in to view price and purchase
-

Fabrication of YBa₂Cu₃O₇ Superconducting Film on {100}〈001〉Textured Cu Tape via Conductive Buffer Layers
- Log in to view price and purchase
-

Fabrication of Zirconium Alloy Cladding Tubes and Other Fuel Assembly Components for Water-Cooled Reactors
- Log in to view price and purchase
-

Factors Influencing Deformation Behavior and Electrical Conductivity of Pure Copper Castings Fabricated by Industrial Process
- Log in to view price and purchase
-

Fatigue Crack Growth Behavior and Susceptibility to Hydrogen Embrittlement in 2000 and 7000 Series Aluminum Alloys
- Log in to view price and purchase
-
Fatigue life of machined components
- Log in to view price and purchase
-

Fatigue Properties in Electrodeposited Nanocrystalline Ni-W Alloy
- Log in to view price and purchase
-

Fatigue Properties in Electrodeposited Nanocrystalline NiW Alloy
- Log in to view price and purchase
-

Fatigue properties of A5052-H14 and A2017-T4 aluminum alloys Effect of surface treatment on
- Log in to view price and purchase
-

FDM 프린팅 기술 3D 모델링의 레이어별 증착 방법
- Log in to view price and purchase
-

Fe-Mn계 진동감쇠 합금강과 그 제조방법
- Log in to view price and purchase
-
Features and Restrictions of Electroslag Remelting with Silica-Bearing Slags for Lightweight High Manganese Steel
- Log in to view price and purchase




































